The lower ball joints are a pressed in fit.

Feb 23, This video is showing one way I remove the control arm bushings from a Chevrolet truck C10 if you don't have a torch and with basic tools that most will. Jul 10, I realized there's not a great video showing the process.

Then use the same fork to remove the ends at the idler arm passenger side mounted to frame support on frame and pitman arm drivers side mounted to steering box.

It's not that difficult but the steel bushings can create some problems. It's not a big deal to t. Control Arm Removal: The top control arm is mounted to the frame with two lock nuts. The best way to remove these nuts is with an impact wrench. Loosen the nuts enough so you can get the shims from behind the control arm shaft. Make sure you keep all the shims together so you can install them back into the same location. Jun 04, Rear arms installed and relocated the viair compressor.

Stripping the rust was a pain in the ass but they turned out great. Control Arm Position.

Remove the nut using a 14mm or 15mm wrench or socket.

Front Left Lower (11) Front Lower Right (11) Front Left Upper (7) Front Right Upper (7) Rear Left Lower (2) Rear Right Lower (2) CHEVROLET C10 PICKUP Control Arms. Filter Results CHEVROLET C10 PICKUP Individual Parts; Part Groups; Results 1 - 18 of Bushings, Control Arm, Delrin, Chevy, C10Each, Front upper and lower bushing sleeves included. Part Number: ART Not Yet Reviewed.